Sofema Aviation Services (SAS) www.sassofia.com Considers best practices related to the management of Part 145 Calibration Systems. Regulatory requirements typically require that “where necessary”, tools, equipment, and in particular test equipment – sometimes called “appliances” are, calibrated to standards, being acceptable for the Regulatory Authority. Calibration Periodicity The required calibration frequency for any appliance should…

Sofema Aviation Services (SAS) www.sassofia.com considers best practices concerning EASA Part 145 Tooling Control & Management. EASA Regulatory Obligations To ensure full compliance with AMC 145.A.40 (b), the maintenance organisation shall ensure that: All tools, equipment and particularly test equipment, as appropriate, are controlled and calibrated according to an officially recognized standard at a frequency…

Sofema Aviation Services (SAS) www.sassofia.com Considers best practices within the Tooling Store Environment. Introduction – The importance of paying attention to housekeeping at work? All employees need to be aware of the housekeeping program. They should know how to work safely with the products and procedures they use. They also need to know how to…

Presented by Sofema Aviation Services (SAS) www.sassofia.com – Here we consider the appropriate tooling Inspection criteria for tooling which is not typically requiring Calibration Control and not covered by “Safety Inspections” applicable for example to Hoist & Harness Straps or Chains, Fuel tank Lighting, etc. Introduction Within the EASA Part 145 Tooling Store are contained…