Tool Store Environment

EASA Part 145 Tooling Store Best Practice House Keeping, Cleanliness and Safety

read more
Tooling Store

April 20, 2021

sasadmin

Sofema Aviation Services (SAS) www.sassofia.com Considers best practices within the Tooling Store Environment. Introduction – The importance of paying attention to housekeeping at work? All employees need to be aware of the housekeeping program. They should know how to work safely with the products and procedures they use. They also need to know how to…

EASA Part 145 Tooling Store General Tooling Inspection Criteria and Procedures

read more
Tooling Inspection

April 19, 2021

sasadmin

Presented by Sofema Aviation Services (SAS) www.sassofia.com – Here we consider the appropriate tooling Inspection criteria for tooling which is not typically requiring Calibration Control and not covered by “Safety Inspections” applicable for example to Hoist & Harness Straps or Chains, Fuel tank Lighting, etc. Introduction Within the EASA Part 145 Tooling Store are contained…

Control of Non-Calibrated Tooling within an EASA Part 145 Organisation

read more
Non-Calibrated Tooling

April 19, 2021

sasadmin

Sofema Aviation Services (SAS) www.sassofia.com considers best practice related to stores tooling inspection procedures – Control of Non-Calibrated Tooling Considerations Related to Tooling which is not subject to calibration but requires detailed Inspection. Introduction The Partial failure of a Boot Strap Kit during the replacement of a CF6-50C2 Wing Engine could have resulted in an…

Stores Tooling & Equipment Issue and Return Inspection Requirements

read more
Stores Tooling & Equipment

April 19, 2021

sasadmin

Sofema Aviation Services (SAS) www.sassofia.com considers best practice for managing an EASA Part 145 compliant Tool Store – Stores Tooling & Equipment Issue and Return Inspection Requirements Regarding the Control & Issue of Tooling & Equipment from Stores, there are a number of Key Checkpoints to consider: Quantity and Condition prior to issue Stores Tooling…