www.EASAOnline.com is pleased to announce the availability of a Special Initial Package for Mandatory Training Courses – Human Factors, Fuel Tank Safety and EWIS for Groups 1 and 2.
Price: 290 USD NOW Only 170 USD
Link for registration: https://easaonline.com/lms/e-learning/57-initial-package-hf-fts-ewis-1-amp-2/preview
See below detailed information about each course.
Human Factors in Aviation Maintenance (Initial) with VO
The aim of the course is to give delegates a full introduction to Aircraft Maintenance Human Factors. The course meets the full intent of EASA 145 requirements (Initial human factors training should cover all the topics of the training syllabus specified in GM 145.A.30 (e))
This course is aimed at:
– Post-holders, managers, supervisors;
– Certifying staff, technicians, and mechanics;
– Technical support personnel such as, planners, engineers, technical record staff;
– Quality control/assurance staff;
– Specialised services staff;
– Human factors staff/ human factors trainers;
– Store department staff, purchasing department staff;
– Ground equipment operators;
– Contract staff in the above categories.
The training will introduce the delegates to all elements of Aviation Human Factors with the intention of providing a better understanding of the subject and to find workable methods to improve standards and compliance. It’s objectives are to recurrent the implications of error, the organisation’s safety culture, its procedures and safety policy and methods of communication.
Fuel Tank Safety (Initial) with VO
Fuel Tank Safety Phase 2 Initial Training (includes all Phase 1 content).
This training is aimed at persons who are receiving FTS training for the first time, it is intended to equip you with the necessary understanding regarding all issues associated with Fuel Tank Safety identified by the following documents.
Annex 1 to ED Decision 2009-006-R
Annex to ED Decision 2009-007-R
The course is particularly suited to personnel of approved maintenance or CAMO organizations required to plan, perform, supervise, inspect and certify the maintenance of aircraft and fuel system components of applicable aircraft.
The objectives of the course are:
The training is designed for both Part M / CAR M and Part 145 / CAR 145 organisations. to cover the history of events related to fuel tank safety issues.
Together with a knowledge of the theoretical and practical elements of the subject, including SFAR 88 and TGL 47, understanding the concept of fuel tank system ALI and CDCCL, The delegate should be able to connect the knowledge into specific examples, in a logical and comprehensive manner, to understand how the above items affect the aircraft; to use documentation and be able to plan the action or apply a Service Bulletin and an Airworthiness Directive.
EWIS for Target Groups 1 and 2 (Initial)
Electrical Wiring Interconnect System EWIS Training was issued as an EASA requirement in the summer of 2008. AMC 20-22 makes It very clear as to the requirements which are to be complied with to ensure the organisation remains in conformity with EASA regulatory requirements.
This Initial training is specifically aimed at Target Groups 1 and 2 personnel who perform EWIS inspection and Personnel who perform EWIS maintenance.
After attending this course, participants should be able to understand of the specific requirements, having in mind that it is required to develop this training further within its organisation particular to reflect the organisation’s aircraft types and wiring practices.
Please Note for Group 1 & Group 2 Practical Training Elements
That the practical elements are not able to be dealt with in the most satisfactory way for example Zonal Inspection and Module G – Connective Device Repair
For this reason we offer the possibility of either:
a) Separately organized practical training with a live instructor
b) Practical training completed within a 145 environment and authorized by the organisations system.
When we receive a completed task sheet signed and stamped off by a Part 145 Organisation Quality System which confirms the competence of the delegate we are able to issue an additional certificate for a nominal amount.
About EASAOnline
EASAOnline (EOL) is a service provided by SAS, offering a range of EASA compliant online video & regulatory courses.
The training courses are designed to be both effective and to help you reach the correct level of understanding in the comfort of your own home or office.
The course content is followed by an online examination after which you are able to print out your certificate.
Through its Learning Management System (LMS), EOL is able to offer a number of tailored services to support our major clients with in-company courses covering internal procedures and “mini” training courses.
The portfolio of available training courses is constantly being expanded and includes all the 145 recurrent training courses, ESDS, SMS, Maintenance Planning and Production Planning. As well as the generic courses which are loaded and available for all users. There are company specific courses, which can only be accessed by your nominated delegate.The offer is not combinable with multiple courses/users discounts.
For groups of more than 50 delegates additional discounts are available, please inquire: easaonline@sassofia.com
Tags:
Electrical Wiring Interconnect Systems (EWIS, EWIS, Fuel Tank Safety (FTS), Human Factors Training
