April 11, 2023

sasadmin

Sofema Aviation Services (SAS) www.sassofia.com considers the accepted processes to comply with Appendix X to CAR 145 issue 9 (This document forms an overview and summary please also refer to the original document for additional details)

Note: Personnel holding a current UAE Aircraft Maintenance Engineer’s type licence may undertake inspections, limited to colour contrast penetrant only.

Definitions

Approval: The act of signing NDT procedures by a responsible Level 3.

Authorisation: (of NDT personnel) Is issued by the Quality Manager after being qualified by the Responsible Level 3 based on the individual’s competence as specified within the certificate.

Certificate: The named person is competent to perform specified NDT.

NDT method: Discipline applying a physical principle in NDT (e.g. ultrasonic method).

NDT technique: A specific way of utilizing an NDT method (e.g. ultrasonic immersion technique).

NDT written practice: A written description of all parameters and precautions to be observed when applying an NDT technique to a specific test following an established standard, code or specification.

NDT instruction: A written description of the precise steps to be followed in testing to an established standard, code or specification or NDT procedure.

NDT Level 1: This is strictly a limited approval and is specified in the organisation’s written practice/inspection procedures manual.

NDT Level 2: An individual qualified to perform and direct NDT according to established and recognised procedures. This is to include but is not limited to the selection of appropriate technique for each method, defining the limitations of the method, understanding of the limitation and application of the method, setting up and calibrating the specification, preparing written test instructions and organizing and report the result of the tests.

Responsible Level 3: Certified Level 3 is responsible to the Accountable Manager for the airworthiness aspects of NDT work undertaken by the organisation.

  • The NDT Level 3 personnel are responsible for the technical and administrative functions of the NDT program. Their authority includes approving NDT procedures and techniques, interpreting codes and standards, evaluating NDT results, training and certifying NDT personnel, and providing technical guidance and support to NDT Level 1 and 2 personnel.
  • NDT Level 3 personnel are also responsible for ensuring that the equipment used for NDT is calibrated, maintained, and operated correctly. They may also conduct audits of the NDT program to ensure that it is effective and meets regulatory requirements.

Qualification: The proven ability of NDT personnel to meet the requirements of a given specification in terms of physical requirements, training knowledge and experience necessary to perform the applicable NDT method.

Type certificate: Includes type certificates, supplementary type certificates, Joint Parts Approval (JPA) authorisation or Joint Technical Standard Orders (JTSO) authorization.

Introduction

Non-Destructive Testing (NDT) personnel shall comply with the approved organization’s written practice/procedures/exposition and any of the following standards:

  • EN4179,
  • ISO 9712
  • NAS 410, and

Note: This Appendix is intended to recognise the competence of independent certified NDT level 3 personnel.

The term NDT is used to include,

  • Liquid penetrant,
  • Magnetic particle,
  • Eddy current,
  • Ultrasonic,
  • Radiographic,
  • Thermography,
  • Other recognised methods (applicable to all NDT methods used by approved organizations).

Procedures for the Qualification of NDT Personnel

  • All approved Organizations involved in any aspect of NDT shall develop and maintain a written practice for the qualification and authorisation of their NDT personnel.
  • The Organisation’s written practice/procedures/exposition as defined shall be approved by the responsible Level 3

Qualified Staff

Approved organisations undertaking NDT must satisfy the GCAA, that they have sufficient qualified staff to discharge the responsibilities of their approval.

  • Organizations shall designate a Responsible Level 3, supported with evidence of certification, responsible to the Accountable Manager for the technical supervision of NDT.
  • This individual will hold certification at Level 3 in the aerospace industry sector and will be referred to as the Responsible Level 3.
  • This position shall be within the organisation’s exposition, and any change in this position shall be advised to the GCAA.

Note: Where the Responsible Level 3 is not qualified in all methods used by the organisation, then the additional Level 3 personnel necessary to provide coverage shall be nominated.

  • Additional Level 3 certification holders shall be listed in the MOE or referenced document.

Acceptance of External Level 3

The GCAA may accept persons outside the organisation as the nominated Level 3, provided a written agreement exists between the individual ad the organisation.

Inspections and Certification of Inspections

  • NDT is to be carried out by approved persons.
  • NDT is to be carried out in accordance with approved procedures.
  • When the inspection required lacks procedure – Must be developed and approved by Level 3 (qualified in the applicable method).
  • Certification of inspections may be made by personnel who hold Level 2 or Level 3 authorisations.
  • Level 3 may authorise Level 1 (As detailed within the written practice/exposition).

Level 3 Certification Requirements

  • Where Level 3 is required to carry out and certify an NDT inspection, then this person must either hold current Level 2 certification or have successfully completed an appropriate Level 2 practical examination and maintained continuity in the application of practical testing, as defined in the referenced standards and detailed in the written practice/exposition.

NDT Procedures and Instructions and their Approval

  • NDT procedures and instructions published and specified by the type certificate holder in NDT manuals, service bulletins, approved drawings etc., constitute airworthiness data.
  •  Where the airworthiness data published by the type certificate holder permits simple changes of equipment, probes etc., then such changes may be carried out by a Level 2 or Level 3 suitably qualified in the appropriate method.
  • Changes not permitted in the airworthiness data require the written agreement of the type certificate holders responsible for the design of the product/structure before such a change is implemented.
  • NDT instructions shall be approved by Level 3 holders qualified in the applicable method.

Note: The control of all NDT procedures and instructions. Including their preparation and authorisation within any GCAA-approved organisation, shall be detailed in the organisation’s written practice/procedures/exposition.

Suppliers and Sub-Contractors to Approved Organisations

  • All suppliers and sub-contractors to an approved organisation where NDT processes are performed shall detail within their written practice/procedures/exception how the organisation ensures that training and approval of NDT personnel shall meet the requirements of this Appendix.

Next Steps

Follow this link to our Library to find & Download related documents for Free.

Sofema Aviation Services www.sassofia.com and Sofema Online www.sofemaonline.com provide Classroom, Webinar and online training for EASA, FAA as well as UAE GCAA regulations. Please see the associated websites or email team@sassofia.com.

Share this with your network:

Tags:

Aircraft, Aircraft Maintenance, Approval, aviation, aviation safety, UAE, Certificate, Aviation SMS, UAE GCAA, Engines, SAS blogs, Aircraft Certification, Aircraft components, Non-Destructive Testing (NDT)