Introduced by Sofema Aviation Services (SAS) www.sassofia.com
Introduction – Here we consider the importance of managing the Aircraft Landing Gear Systems as Part of the overall Aircraft Lease Management
Aircraft Lease Review – Landing Gear Life Limited Parts – What is Back to Birth Traceability? (BTB) or (B2B)
Whilst B2B is not a term which EASA typically uses – It is however recognized within the leasing community as the basis of validating the integrity of Life Limited Components.
With the Introduction of Maintenance Steering Group 3 (MSG3) back in 1980 the number of Life Limited Components reduced with many “Hard Time” components being moved to the “On Condition” classification.
However many components including “Landing Gear” (LDG Gear) components continued to be “Life Limited” so it is important that we are able to track these components correctly within the Technical Records System.
In general, there can be no deviations from manufacturer-imposed life limits even though Life Limits are based on “Safe Life” principles where the component is called within a considerable margin of its expected or anticipated failure.
During the life of the aircraft, it is normal for major components to be replaced a number of times, moreover, during overhaul and shop visits sub-components are often replaced.
The use of Re-Market (Part Life) Components
It is quite common to replace a removed Landing Gear Component with a pre-used one and in such cases care should be taken to manage the numerous “sub” (Life Limited Components) LLP components which may have been taken from a different unit, operated on different aircraft by different operators and under different authorities.
The task of managing all associated documentation back to birth is of critical importance not just to ensure flight safety but to also guarantee the maximum retention of asset value.
New Parts Certification
Typically, individual release certificates for the components installed on a “new” aircraft (including landing gear & engines) are not provided, however, they do exist as they are “manufactured” by a different company than the aircraft.
Data concerning the subparts of all LLP are provided as part of the master assembly status provided by the Type Certificate Holder with the new aircraft.
In-Service Back to Birth Traceability
During aircraft in service operations, the major assemblies containing several life-limited parts will be replaced, and during overhauls and refurbishment other LLP may also be replaced due to damage and deterioration.
To optimise the maintenance program there is an option to install used life-limited parts which have enough life remaining to meet the airline’s operational requirements.
As the aircraft matures, the parts can mix and match and the task of maintaining Back to Birth Traceability becomes ever more challenging.
Note: Failure to fully engage with this data can lead to costly exposures during lease return audits.
How can we Establish the Actual Life of the Component?
Whilst the process is straightforward it is by no means easy as we should trace every movement from when the component was manufactured. From its first release certificate or New Aircraft build evidence together with all fitment evidence and Hours, Cycles and Landings as applicable throughout the operation and use of the component in service.
It may be necessary to obtain statements from the previous operators confirming that while under their control, the engine (or aircraft, or landing gear) to which a given component has been installed has flown a given amount of cycles and has not suffered from any incidents or accidents.
What Documents are Required to Show Back to Birth Traceability?
Manufacturer Certification
a) Aircraft export certificate of airworthiness together with a fit list of all components installed.
b) Master assembly (engine or landing gear) release certificate (EASA Form One, FAA 8130 or equivalent).
c) Fit list of sub-components fitted at manufacture. This shows that the component has been factory fitted to a new master assembly.
d) Release certificate stating “manufactured” for the component itself – you will get this is the component has been manufactured as a spare part and was not originally installed on any engine or landing gear leg.
e) Removal / Installation Documentation from Previous Operators.
Shop Visit & Maintenance Documentation
It may be necessary to have the shop visit reports for the master assembly, including release certificates for master assembly and any given component.
It will be also necessary to have a copy of the CRS of all relevant maintenance checks. The Tech Log page does contain a CRS as well as Flight Hours / Cycles.
Note: typically task cards do not constitute a CRS.
Statements from Previous Operators
Statements confirming that the master assembly and/or the aircraft it was fitted to, was flown by the given operator within a given range of dates and for a given number of hours and cycles.
Non-incident statements. Those statements are mainly necessary for insurance purposes. They confirm that, while the component has been under the previous operator’s supervision, it has not taken part in any accident or serious accident, has not been subjected to saltwater or fire, etc.
Additional Terms Used
- MSN – Manufactures Serial Number
- AC HRS – Aircraft Hours
- AC CYC – Aircraft Cycles
- TT -Total Time (Hours)
- TC – Total Cycles
- LLP – Life Limited Part Hours/Cycles/Calendar days (FH/FC/Days)
- TSN Time Since New
- CSN Cycles Since New
- TSO Time Since Overhaul
- CSO – Cycles since Overhaul
Looking for Aircraft Lease Management Insider Knowledge?
Then join Sofema Aviation Services for an Instructor Led Webinar providing an insight into dealing with all the challenges and be able to manage you aircraft lease in the best possible way:
Aircraft Lease and Lease Returns – Upskill Now
This Course is specifically offered to Middle East and Far East Clients
Starts Each Day 0900 Bangkok Time (GMT + 0700)
19th to 23rd September 2022
- How does the Aircraft Lease Management Process Work?
- How Can I gain Knowledge and Build Competence to engage with Aircraft & Engine Lease Market
- How To Manage Asset Value and Aircraft Technical Reserves
Instructor Led Interactive Webinar 5-Day Program
Sofema Aviation Services (SAS) www.sassofia.com is pleased to present a 5-Day Program Instructor Led Webinar provide a valuable insight into the addressing the challenges of Aircraft Lease Management through our renowned Aircraft Technical Lease Training Program
Managing Aircraft Lease Agreements and Maintenance Reserves – 3 Days – Webinar
Technical Records for Aircraft Lease Management – 2 Days – Webinar
- Book Early for Additional Saving
- Attend Both Courses for Additional Saving
- Further Discounts for Multiple Attendance
There is an amazing wealth of specialist knowledge to be shared during the program
Next Steps
Follow this link to our Library to find & Download related documents for Free.
Please see here or email team@sassofia.com to save your spot & secure your additional discounts now!
Tags:
aviation, EASA, Aircraft Lease, Aircraft Technical Records, Landing Gear, Aircraft Lease Returns, Lease Management, webinar, SAS training, Aircraft parts, B2B, Aircraft Lease Management, Back to Birth Traceability, Landing Gear Component
